MAINTENANCE WORK ON FRAME AND ENGINE
132
100601-10
–
Turn bulb socket
counterclockwise all the way and take it out of the tail light.
–
Press bulb
carefully into the socket, turn it counterclockwise by about 30°, and pull
it out of the socket.
–
Press the new bulb carefully into the socket and turn it clockwise until it stops.
Brake light (PR21W / socket BAW15s) (
–
Insert the bulb socket into the tail light and turn clockwise until it stops.
–
Check the lighting function.
–
Position the tail light. Mount and tighten nuts with the washers.
Guideline
Nut, tail light
M6
8 Nm (5.9 lbf ft)
9.61
Checking the headlight setting
0
0
A
A
0
0
B
B
400609-10
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance of
under the first mark.
Guideline
Distance
5 cm (2 in)
–
Park the vehicle at a distance of
vertically in front of the wall and switch on the low
beam headlight.
Guideline
Distance
5 m (16 ft)
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
Summary of Contents for 990 Adventure AUS/UK
Page 2: ......
Page 167: ...MAINTENANCE WORK ON FRAME AND ENGINE 165 Mount the seat p 67...
