KTM 990 Adventure AUS/UK, Owner'S Manual, Page: 133 / 216

MAINTENANCE WORK ON FRAME AND ENGINE
131
100600-10
–
Pull bulb sockets

out of the tail light.
–
Pull bulbs

out of the sockets.
–
Insert new bulbs into the sockets.
Tail light (WR5W / socket W2.1x9.5d) ( p. 190)
–
Insert the bulb sockets into the tail light.
–
Check the lighting function.
–
Position the tail light. Mount and tighten the nuts with the washers.
Guideline
Nut, tail light M6 8 Nm (5.9 lbf ft)
9.60
Changing the brake light bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
100599-10
–
Remove nuts

at the bottom of the rear fender and pull out the tail light toward the
rear.