KTM 990 Adventure AUS/UK, Owner'S Manual, Page: 127 / 216

MAINTENANCE WORK ON FRAME AND ENGINE
125
100589-11
–
Position side cover

at the fuel tank on the bottom and hold it at an angle.
–
Attach the overflow hose of the fuel tank to the connector.
–
Connect the plug-in connectors of the turn signal cables and swing the side cover up
toward the vehicle.
–
Mount and tighten screws

with the washers.
Guideline
Remaining chassis nuts M6 15 Nm
(11.1 lbf ft)
–
Check the function of turn signal.
9.53
Removing the headlight mask with the headlight
–
Switch off all power consumers and the engine.
–
Remove the front side cover. ( p. 124)
100590-10
–
Unhook the headlight mask from the cockpit holder and remove it toward the front.