KTM 890 DUKE 2021, Owner'S Manual

Page: 43 / 143

COMBINATION INSTRUMENT 7
41
The gear shift recommendation can be switched on or off with the
function
Shift Light .
7.16.32 KTM MY RIDE (optional)
V01135-01
Condition
• Function KTM MY RIDE (optional) activated.
• Function Bluetooth ® (optional) activated.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the KTM MY RIDE menu is
marked on the display. Press the SET button to open the menu.
In KTM MY RIDE , an appropriate cellphone or headset can be
paired via Bluetooth ® with the KTM MY RIDE control unit.
Info
Not every cellphone and headset is suitable for pairing with
the
KTM MY RIDE control unit.
The standard Bluetooth ® 2.1 must be supported.
7.16.33 Pairing (optional)
V01137-01
Condition
• The motorcycle is stationary.
• Function
KTM MY RIDE (optional) activated.
• Bluetooth ® (optional) is switched on.
• The Bluetooth ® should also be switched on in the device to be
paired.
• The Bluetooth ® visibility must be activated on the device that is
to be paired.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the KTM MY RIDE menu is
marked on the display. Press the SET button to open the menu.
–
Press the
UP
or
DOWN
button until
Setup
is marked on the dis-
play. Press the
SET
button to open the menu.
–
Press the
UP
or the
DOWN
button until the menu item
Phone
or
Headset is marked.
Info
Two cellphones or headsets can never be paired
simultaneously with the
KTM MY RIDE control unit. Only
one cellphone and one headset can be paired with the
KTM MY RIDE control unit at the same time.
–
In the submenu Phone , a suitable cellphone can be paired with
the KTM MY RIDE control unit.
–
In the submenu Headset , a suitable headset can be paired with
the KTM MY RIDE control unit.
–
Press the SET button to open the menu.
–
When pairing the device for the first time, press the UP
or DOWN button until Pairing is marked. Press the SET button
to open the menu.
–
Navigate to the device required using the
UP
or
DOWN
button.
Confirm the selection using the SET button.