3
WORK
6
3.1
Raising the motorcycle with the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
L00036-10
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (59229055000)
The wheels must no longer touch the ground.
–
Secure the motorcycle against falling over.
3.2
Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
L00022-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
1
into the left side of the wheel spin-
dle.
Info
Remove the plug-in stand before riding.
3.3
Installing the front wheel
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
L00094-11
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease shaft seal rings
1
and bearing surface
A
of the spacers.
Long-life grease (
–
Insert the spacers.
L00092-11
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert wheel spindle.
–
Mount and tighten screw
2
.
Guideline
Screw, front wheel spindle
M20x1.5
35 Nm
(25.8 lbf ft)
