16
TUNING THE ENGINE
143
16.3
Adjusting the basic position of the shift lever
401950-12
–
Remove screw
with washers and take off shift lever
.
401951-10
–
Clean gear teeth
of the shift lever and shift shaft.
–
Mount shift lever
on the shift shaft in the required position and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
–
Locate and tighten screw
with washers.
Guideline
Screw, shift lever
M6
14 Nm
(10.3 lbf ft)
Loctite
®
243™
Summary of Contents for 690 SMC R
