10
TUNING THE CHASSIS
66
10.9
Adjusting the handlebar position
x
601875-10
–
Remove the four screws
1
. Remove the handlebar clamps. Take off the handlebar and
set it aside.
Info
Cover the motorcycle and attachments to protect them from damage.
Do not kink the cables and lines.
–
Remove the two screws
2
. Take off the handlebar holder.
–
Move the handlebar holder to the desired position. Mount and tighten the two
screws
2
.
Guideline
Screw, handlebar support
M10
40 Nm
(29.5 lbf ft)
Loctite
®
243™
Info
Position the handlebar holders evenly on the left and right.
–
Position the handlebar.
Info
Ensure that the cables and lines are routed correctly.
–
Position the handlebar clamps. Mount and evenly tighten the four screws
1
.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)