KTM 690 SMC 2008, Repair Manual, Page: 53 / 227

06/AIR FILTER
51
9.1
Removing the air filter
–
Remove the seat. ( p. 54)
100285-10
–
Remove screws

. Remove filter box top

.
100286-10
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the
engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the
engine and result in increased wear.
–
Remove air filter

.
9.2
Installing the air filter
100287-10
–
Clean the air filter box.
–
Mount air filter

.
Info
The air filter must lie flush against the air filter box along the entire sealing
surface

.
If the air filter is not correctly mounted, dust and dirt can penetrate into the
engine and can cause damage.
–
Hook filter box top

into the front of the air filter box and swing down.
100285-11
–
Mount and tighten screws

.
Guideline
Screw, air filter box top M6 2 Nm (1.5 lbf ft)
–
Mount the seat. ( p. 54)
9.3
Removing the air filter box
–
Take off the side cover. ( p. 54)
300202-10
–
Remove screws

.
–
Take off the voltage regulator and hang it to the side in a de-energized state.
–
Detach and expose hose

.