41/THROTTLE VALVE BODY
165
EPT control unit
–
Select model.
–
Select
"ECU Diagnostics"
.
–
Highlight
"EPT throttle motor drive control LC4"
control unit.
–
Press
"Continue"
.
–
Select
"ECU Flashing"
.
–
"Please enter the password:"
–
Press
"Continue"
.
–
Read the safety instructions and create the necessary preliminary conditions.
–
Confirm the instructions by clicking on
"OK"
.
–
Press
"Select file"
and select a new mapping.
Info
"The BLZ file and the exhaust system must match!"
–
Press the
"ECU flash process"
button.
–
Read the prompt and confirm with
"OK"
.
The new mapping is loaded.
Info
Start the engine and perform an initialization run.
24.4
Requesting the enabling code
Condition
The changed EFI control unit and/or the EPT control unit is connected.
The ignition is on.
The diagnostics tool is connected and running.
Flashing of the EFI control unit and/or the EPT control unit is completed.
400687-60
–
Select model.
–
Select
"ECU Diagnostics"
.
–
Highlight the
"Injection management EFI LC4"
control unit.
–
Press
"Continue"
.
–
Select
"Coding"
.
–
"Please enter the password:"
–
Press
"Continue"
.
–
Select
"Change VIN - New identity"
.
–
Press
"Continue"
.
–
Read the information page on the KTM diagnostics tool and, using
"Continue"
, start
the coding process.
–
Overwrite the entry under
"Please enter VIN:"
with the new chassis number.
Info
For used control units, the chassis number programmed last is displayed.
–
Press
"Continue"
.
–
Select
"Code form"
.
–
Press
"Print"
.
The protocol is being printed out.
–
Fill out the protocol and send to
.
A response mail containing the enabling code arrives.
Summary of Contents for 690 SMC 2008
Page 1: ...REPAIR MANUAL 2008 690 SMC EU 690 SMC AUS UK 690 SMC USA Article no 3206042en...
Page 2: ......
Page 185: ...183...
