KTM 690 Enduro R, Owner'S Manual

Page: 110 / 191

MAINTENANCE WORK ON CHASSIS AND ENGINE
108
400602-10
–
Check the front and rear tires for cuts, run-in objects and other damage.
» If the tires exhibit cuts, run-in objects or other damage:
–
Change the tires.
–
Check the depth of the tread.
Info
Note local national regulations concerning the minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum permissible depth:
–
Change the tires.
–
Check the age of the tires.
Info
The tire's date of manufacture is usually part of the tire markings and is indi-
cated by the last four digits of the
DOT marking. The first two digits refer to the
week of manufacture and last two digits refer to the year of manufacture.
KTM recommends that the tires are changed regardless of the actual wear, at
the latest after five years.
» If a tire is more than five years old:
–
Change the tires.
9.47
Checking the tire air pressure
Info
Low tire air pressure leads to abnormal wear and overheating of the tire.
Correct tire air pressure ensures optimal riding comfort and maximum tire service life.