11
SERVICE WORK ON THE CHASSIS
93
11.18
Adjusting basic position of clutch lever
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
B01943-11
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
.
–
When adjusting the clutch lever, make sure to leave a minimum clearance to other parts
of the vehicle.
Guideline
Minimum clearance
5 mm (0.2 in)
11.19
Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
Summary of Contents for 690 Enduro R USA
