KTM 690 Enduro R USA, Owner'S Manual

Page: 73 / 207

10 TUNING THE CHASSIS
71
–
Mount the seat. ( p. 80)
–
Remove the motorcycle from the work stand.
10.12 Adjusting the riding sag
x
Preparatory work
–
Raise the motorcycle with the work stand.
–
Remove the seat. ( p. 80)
–
Take off the side cover.
–
Remove the shock absorber.
x
–
After removing the shock absorber, clean it thoroughly.
201352-10
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Medium (standard) 80 N/mm (457 lb/in)
Hard 85 N/mm (485 lb/in)
Info
The spring rate is shown on the outside of the spring.
Finishing work
–
Install the shock absorber. x
–
Mount the side cover.
–
Mount the seat. ( p. 80)
–
Remove the motorcycle from the work stand.
–
Check the static sag of the shock absorber. ( p. 68)
–
Adjust the rebound damping of the shock absorber. ( p. 66)