KTM 690 Enduro R USA, Owner'S Manual

Page: 154 / 207

16 TUNING THE ENGINE
152
16.1 Adjusting the engine characteristic
Preparatory work
–
Switch off the ignition by turning the ignition key to position OFF .
–
Remove the seat. ( p. 80)
B01983-10
Main work
–
Pull the Map
‑
Select switch and holder  upward off of the retaining bracket.
–
Pull the Map
‑
Select switch out of the holder.
601802-10
–
Turn the adjusting wheel until the desired digit is next to marking

.
Set the Map
‑
Select switch to Soft.
–
Set the adjusting wheel to position 1 .
Soft
–
reduced homologated peak performance for better driveability.
Set the Map
‑
Select switch to Advanced.
–
Set the adjusting wheel to position 2 .
Advanced
–
homologated performance with extremely direct responsiveness.
Set the Map
‑
Select switch to Standard.
–
Set the adjusting wheel to position 3 , 4 , 5 , 6 , 7 , 8 or 9 .
Standard
–
homologated performance with balanced responsiveness.
Set the Map
‑
Select switch to poor fuel quality.
–
Set the adjusting wheel to position 0 .
Poor fuel quality
–
homologated performance is reduced in accordance with the
fuel quality, use for no more than 1 tank of fuel