CONTROLS
29
800083-19
–
Switch on the ignition by turning the ignition key to position
ON
.
–
Press the
M
button repeatedly until the
Trip 1
mode is active.
–
Keep the
S
button pressed.
The
Trip 1
display is set to
0.00
.
5.20
Combination instrument - setting/resetting TRIP 2
Info
The
TRIP 2
trip counter runs constantly and counts up to
999.9
.
The trip counter can be used to measure the distance covered during trips or between two refueling stops. After the value
999.9
is
reached, the trip counter starts at
0.0
again.
800083-20
–
Switch on the ignition by turning the ignition key to position
ON
.
–
Press the
M
button repeatedly until the
Trip 2
mode is active.
–
Keep the
S
button pressed.
The
Trip 2
display is set to
0.00
.
Summary of Contents for 690 Enduro R AUS
