KTM 690 Enduro R AUS, Owner'S Manual

Page: 168 / 190

TECHNICAL DATA - ENGINE TIGHTENING TORQUES
166
Oil hole plug M10x1 15 Nm (11.1 lbf ft) Loctite
®
243™
Plug, drain hole of water pump M10x1 15 Nm (11.1 lbf ft)
–
Plug, oil bore for oil radiator M10x1 15 Nm (11.1 lbf ft)
–
Screw, unlocking of timing chain ten-
sioner M10x1 10 Nm (7.4 lbf ft)
–
Spark plug M12x1.25 17 Nm (12.5 lbf ft)
–
Coolant temperature sensor on cylinder
head M12x1.5 12 Nm (8.9 lbf ft)
–
Oil drain plug with magnet M12x1.5 20 Nm (14.8 lbf ft)
–
Oil pressure regulator valve plug M12x1.5 20 Nm (14.8 lbf ft)
–
Plug, oil bore M14x1.5 15 Nm (11.1 lbf ft)
Loctite
®
243™
Engine case stud M16x1.5 25 Nm (18.4 lbf ft)
Loctite
®
243™
Rotor nut M18x1.5 100 Nm (73.8 lbf ft)
–
Nut, engine sprocket M20x1.5 60 Nm (44.3 lbf ft)
Loctite
®
243™
Nut, inner clutch hub M20x1.5 100 Nm (73.8 lbf ft)
Loctite
®
243™
Nut, primary gear M20LHx1.5 90 Nm (66.4 lbf ft) Loctite
®
243™
Plug, oil screen M20x1.5 15 Nm (11.1 lbf ft)
–
Plug, timing chain tensioner M20x1.5 25 Nm (18.4 lbf ft)
–
Plug, oil thermostat M24x1.5 15 Nm (11.1 lbf ft)
–
Screw in alternator cover M24x1.5 8 Nm (5.9 lbf ft)
–