KTM 690 Enduro R AUS, Owner'S Manual

Page: 130 / 190

ELECTRICAL SYSTEM
128
Turn signal (R10W / socket BA15s) ( p. 168)
–
Mount the orange plug.
–
Position the diffuser.
–
Insert the screw and turn it counterclockwise first until it engages in the thread. Tighten
the screw slightly.
–
Check that the turn signal system is functioning properly.
13.11
Checking the headlight setting
0 0 A A
0 0 B B
400726-10
–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance

under the first mark.
Guideline
Distance

5 cm (2 in)
–
Position the vehicle vertically at a distance

in front of the wall.
Guideline
Distance

5 m (16 ft)
–
The rider, with luggage and a passenger if applicable, now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
For a ready-to-operate motorcycle with a rider, and with luggage and a passenger if
applicable, the light-dark boundary must lie exactly on the lower mark.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. ( p. 129)