OPERATING ELEMENTS
31
700121-01
–
Switch on the ignition by turning the ignition key in the position
.
–
Press the
MODE
button several times until the
TRIP
1
display mode is active.
–
Keep the
SET
button pressed.
The
TRIP
1
display is at
0.0
.
5.24
Combination instrument - setting/resetting
TRIP
2 display
Info
The tripmaster
TRIP
2
operates constantly and counts up to
999.9
.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching
999.9
, the tripmaster begins
again at
0.0
.
700122-01
–
Switch on the ignition by turning the ignition key in the position
.
–
Press the
MODE
button several times until the
TRIP
2
display mode is active.
–
Keep the
SET
button pressed.
The
TRIP
2
display is at
0.0
.
Summary of Contents for 690 ENDURO AUS/UK 2008
