14/LIGHT SYSTEM, INSTRUMENTS
102
800100-10
(690 Enduro R)
–
Pull bulb socket
out of the reflector.
–
Pull parking light bulb
out of the bulb socket.
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
–
Install the headlight mask with the headlight. (
16.11
Changing the headlight bulb
Note
Damage to reflector
Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Remove the headlight mask with the headlight. (
600610-10
(690 Enduro)
–
Pull off connector
.
–
Take off rubber cap
of the headlight bulb.
600611-10
–
Detach spring bar
.
–
Remove headlight bulb
.
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) (
–
Fix the headlight bulb in the headlight using the spring bar.
–
Replace the rubber cap. Attach the connector.
800098-10
(690 Enduro R)
–
Pull off connectors
,
and
.
–
Take off rubber cap
of the headlight bulb.
800099-10
–
Turn holder
about 30° counterclockwise and remove it.
–
Remove headlight bulb.
–
Insert a headlight bulb in the holder.
Headlight (S2 / socket BA20d)
–
Insert the holder into the headlight housing and fix it by turning it approx. 30°
clockwise.
–
Replace the rubber cap. Attach the connector.
–
Install the headlight mask with the headlight. (
Summary of Contents for 690 Enduro AUS 2010
Page 2: ......