30/ENGINE - WORK ON INDIVIDUAL PARTS
134
19.39
Checking electric starter drive
5
5
6
6
1
1
2
2
4
4
3
3
300129-01
–
Check the teeth and seating of the starter idler gear
for damage and wear.
» If there is damage or wear:
–
Replace the starter idler gear and/or needle bushing.
–
Check the teeth and seating of the torque limiter
for damage and wear.
» If there is damage or wear:
–
Replace the torque limiter and/or needle bushing.
–
Check freewheel gear
and bearing when removed for damage and wear.
» If there is damage or wear:
–
Replace the freewheel gear and/or the bearing.
–
Check the freewheel
when removed for damage and wear.
» If there is damage or wear:
–
Replace the freewheel.
–
Check the toothing of the starter motor
for damage and wear.
» If there is damage or wear:
–
Replace the starter motor.
–
Clamp the minus (negative) cable of a 12 Volt power supply to the starter motor housing. Briefly connect the plus (positive) cable
of the power supply to the starter motor connection.
» If the starter motor does not turn when you close the power circuit:
–
Replace the starter motor.
–
Replace the O-ring
of the starter motor.
19.40
Removing freewheel
300127-10
–
Extract the lock ring
from the groove using suitable pliers.
