KTM 690 Duke USA, Owner'S Manual

Page: 136 / 182

17 SERVICE WORK ON THE ENGINE
134
17.1 Checking the engine oil level
Info
The engine oil level must be checked at normal engine operating temperature.
Condition
The engine is at operating temperature.
602585-10
–
Stand the motorcycle upright on a horizontal surface.
–
Check the engine oil level.
Info
After switching off the engine, wait one minute before checking the level.
The engine oil must be between the lower and upper edge of the oil level viewer.
» If the engine oil level is not at the specified level:
–
Add the engine oil. ( p. 139)
17.2 Changing the engine oil and filter, cleaning the oil screens
x
Warning
Danger of scalding
Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.