KTM 690 Duke R, Owner'S Manual, Page: 38 / 193

6 CONTROLS
36
401445-01
–
Switch on the ignition by turning the ignition key to the position .
–
Press the MODE button repeatedly until the TRIP 1 mode is active.
–
Keep the SET button pressed.
The TRIP 1 display is set to 0.0 .
6.11.12 Setting/resetting display TRIP 2
Info
The TRIP 2 trip counter is always running and counts up to 999.9 .
The trip counter can be used to measure the distance covered during trips or between two refueling stops. After the value 999.9 is
reached, the trip counter starts at 0.0 again.
401446-01
–
Switch on the ignition by turning the ignition key to the position .
–
Press the
MODE
button repeatedly until the
TRIP 2
mode is active.
–
Keep the SET button pressed.
The TRIP 2 display is set to 0.0 .