11
SERVICE WORK ON THE CHASSIS
79
B00942-10
–
Check the chain sliding guard for wear.
» If drill hole
becomes visible on the chain sliding guard in area
:
–
Replace the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain sliding
guard
M6
10 Nm
(7.4 lbf ft)
Loctite
®
243™
11.12
Adjusting the basic position of the clutch lever
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply force.
Do not make any adjustments while riding!
M00656-13
–
Adjust the basic position of the clutch lever to your hand size by turning adjusting
screw
.
Summary of Contents for 690 DUKE R EU
