KTM 690 DUKE R EU, Owner'S Manual

Page: 59 / 179

8 RIDING INSTRUCTIONS
57
–
If the engine stalls (e.g. at a crossroads), just pull the clutch lever and press the elec-
tric starter button. You do not have to shift into neutral.
–
Switch off the engine if you expect to be standing for a long time.
–
If the FI warning lamp ( MIL ) lights up during a trip, stop immediately. When you shift to
neutral, the FI warning lamp ( MIL ) starts to flash.
Info
From the flash rhythm you can deduce a two-digit number, the so-called blink
code. The blink code tells you which component is affected by a fault. (Your
authorized KTM workshop will be glad to help.)
8.5 Applying the brakes
Warning
Danger of accidents
Reduced braking efficiency due to a wet or dirty brake system.
–
Clean or dry a dirty or wet brake system by riding and braking gently.
Warning
Danger of accidents Reduced braking efficiency caused by spongy pressure point of front or rear brake.
–
Check the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
Warning
Danger of accidents Failure of brake system.
–
If the foot brake lever is not released, the brake linings drag continuously. The rear brake may fail due to overheating. Take your
foot off the foot brake lever when you are not braking.
Warning
Danger of accidents Longer stopping distance due to higher overall weight.
–
Take the longer stopping distance into account when carrying a passenger and baggage.