KTM 690 DUKE R AUS/UK, Owner'S Manual, Page: 31 / 187

CONTROLS
29
400838-01
–
Switch on the ignition by turning the ignition key to the position .
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
–
Press the MODE button to set the hour.
–
Press the SET button to set the minute.
–
Keep the
MODE
button and the
SET
button pressed simultaneously.
The time is set.
5.20
Combination instrument - display ODO
400839-01
In the ODO display mode, the total distance traveled is shown in kilometers or miles.
Info
This value is retained, even if the battery is disconnected and/or the fuse blows.
5.21
Combination instrument - setting/resetting TRIP 1
Info
The TRIP 1 trip counter is always running and counts up to 999.9 .
The trip counter can be used to measure the distance covered during trips or between two refueling stops. After the value 999.9 is
reached, the trip counter starts at 0.0 again.