KTM 690 DUKE R AUS/UK, Owner'S Manual, Page: 128 / 187

COOLING SYSTEM
126
700182-11
–
Screw off the radiator cap

and check the coolant level in the radiator.
The radiator must be completely filled.
» If the coolant level does not meet specifications:
–
Correct the coolant level and find out the cause of the loss.
Alternative 1
Coolant ( p. 173)
Alternative 2
Coolant (mixed ready to use) ( p. 173)
» If you had to add more coolant than the specified amount:
> 0.50 l (> 0.53 qt.)
–
Fill/bleed the cooling system. x ( p. 127)
–
Mount the radiator cap.
–
Position the fuel tank. ( p. 68)
–
Mount the seat. ( p. 67)
14.4
Draining the coolant
x
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.