KTM 690 DUKE MAL, Owner'S Manual, Page: 144 / 197

16 TUNING THE ENGINE
142
16.1 Setting the engine characteristics
Preparatory work
–
Switch off the ignition by turning the ignition key to the position .
–
Remove the passenger seat. ( p. 78)
B00966-12
Main work
–
Pull off the Map
‑
Select switch with holder
1
from the retaining bracket.
–
Pull the Map
‑
Select switch out of the holder.
B00971-10
–
Turn the adjusting wheel until the desired number is aligned with marking
2
.
Set the Map
‑
Select switch to Soft.
–
Set the adjusting wheel to position 1 .
Soft
–
Homologated performance with very gentle response
Set the Map
‑
Select switch to Advanced.
–
Set the adjusting wheel to position 2 .
Advanced
–
Homologated performance with very direct response
Set the Map
‑
Select switch to Standard.
–
Set the adjusting wheel to position 3 , 4 , 5 , 6 , 7 , 8 , 9 or 0 .
Standard
–
Homologated performance with balanced response
–
Position the Map
‑
Select switch in the holder.
–
Push the Map
‑
Select switch with the holder into the retaining bracket.
Finishing work
–
Mount the passenger seat. ( p. 79)