TUNING THE CHASSIS
62
601091-01
–
Measure the cross over setting
B
between sliding bushing
2
and the collar of adjusting
ring
3
.
Guideline
Cross over
19 mm (0.75 in)
–
Tighten the spring by turning adjusting rings
1
to measurement
B
.
Info
The sliding bushing is made of plastic. Therefore, do not lock it too tightly to
avoid damaging the thread.
The left and right shock absorbers should have the same settings.
–
Lock the adjusting rings.
–
Remove the vehicle from the lifting gear. (
9.8
Front shock absorber - adjusting the spring preload
Warning
Danger of accidents
Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Extreme modifications to the adjustment of the spring elements can cause a serious deterioration in the handling characteris-
tics and overload some components.
–
Only make adjustments within the recommended range.
–
After making adjustments, ride slowly at first to get the feel of the new ride behavior.
Caution
Danger of accidents
Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)
