7
SPEEDOMETER
28
7.17
Display mode SPEED/TR2 (trip master 2)
400324-01
–
Repeatedly press the button
briefly until
TR2
appears at the top right of the dis-
play.
TR2
(trip master 2) runs constantly and counts up to 999.9.
Press the button
for 2
–
3 seconds.
Clears the values
TR2
and
A2
.
Briefly press the
button .
Next display mode
Press the button
for 2
–
3 seconds.
Reduces value of
TR2
.
Briefly press the
button .
Reduces value of
TR2
.
7.18
Setting TR2 (trip master 2)
400324-01
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
briefly until
TR2
appears at the top right of the dis-
play.
–
Press the button
for 2
–
3 seconds until
TR2
flashes.
The displayed value can be set manually with the button
and the button . This is a
very practical function when riding using the road book.
Info
The
TR2
value can also be corrected manually during the journey with the but-
ton
and the button .
If 999.9 is exceeded, the value of
TR2
is automatically reset to 0.0.
Press the button
for 2
–
3 seconds.
Increases value of
TR2
.
Briefly press the
button .
Increases value of
TR2
.
Press the button
for 2
–
3 seconds.
Reduces value of
TR2
.
Briefly press the
button .
Reduces value of
TR2
.
Wait 10
–
12 sec-
onds
Saves and closes the Setup menu
7.19
Display mode SPEED/A1 (average speed 1)
400325-01
–
Repeatedly press the button
briefly until
A1
appears at the top right of the dis-
play.
A1
(average speed 1) shows the average speed calculated using
TR1
(trip master 1) and
S1
(stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
for 2
–
3 seconds.
Displays of
TR1
,
A1
and
S1
are reset to 0,0.
Briefly press the
button .
Next display mode
Press the button
for 2
–
3 seconds.
No function
Briefly press the
button .
No function
