3 WORK
26
3.12
Mounting the seat
H02218-11
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
S03480-10
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
3.13
Disconnecting the negative cable of the 12-V battery
Preparatory work
–
Press and hold the switch-off button
while the engine is
idling until the engine stops.
(500 EXC
‑
F US, 500 EXC
‑
F Six Days US)
–
Turn the ignition key in the ignition lock to the position
while the engine is idling.
–
Remove the seat. (
R01414-10
Main work
–
Disconnect negative cable
1
of the 12-V battery.
