background image

3 WORK

34

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

Avoid skin, eye and clothing contact with fuel.

Immediately consult a doctor if you swallow fuel.

Do not inhale fuel vapors.

In case of skin contact, rinse the affected area with plenty of water.

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

Change your clothing in case of fuel spills on them.

Keep fuels correctly in a suitable canister, and out of the reach of children.

Note

Environmental hazard

Improper handling of fuel is a danger to the environment.

Do not allow fuel to enter the groundwater, the soil, or the sewage system.

K01334-10

Press release button

1

, turn the fuel tank filler cap counter-

clockwise, and lift it off.

3.24

Closing the fuel tank filler cap

K01334-11

Mount fuel tank filler cap and turn it clockwise until the
release button

1

engages.

Info

Route fuel tank breather hose

2

without kinks.

3.25

Refueling

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.

Switch off the engine for refueling.

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

If any fuel is spilled, wipe it off immediately.

Observe the specifications for refueling.

Summary of Contents for 500 EXC-F 2022













































Reviews: