KTM 500 EXC AUS, Owner'S Manual

Page: 86 / 119

14 ELECTRICAL SYSTEM
84
Finishing work
–
Check the headlight setting. ( p. 85)
14.9 Changing the headlight bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 83)
101403-10
Main work
–
Turn rubber cap
1
together with the underlying lamp socket counterclockwise all
the way and remove it.
–
Pull lamp socket
2
of the parking light out of the reflector.
100862-10
–
Press headlight bulb
3
into the lamp socket lightly, turn it counterclockwise all the
way and pull it out.
–
Insert a new headlight bulb.
Headlight (S2 / socket BA20d) ( p. 106)
–
Insert the rubber cap together with the lamp socket into the reflector and turn it
clockwise all the way.
Info
Ensure that the O-ring
4
is seated properly.
–
Insert the lamp socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 83)
–
Check the headlight setting. ( p. 85)
14.10 Changing the turn signal bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.