KTM 500 EXC AUS, Owner'S Manual

Page: 109 / 119

22 TECHNICAL DATA
107
Weight of rider: 85… 95 kg (187… 209 lb.) 4.6 N/mm (26.3 lb/in)
Fork length 940 mm (37.01 in)
Air chamber length 110 +10
−
20
mm (4.33 +0.39
−
0.79
in)
Fork oil per fork leg 618 ml (20.89 fl. oz.) Fork oil (SAE 4) (48601166S1) ( p. 110)
22.8 Shock absorber
Shock absorber part number 12.18.7L.69
Shock absorber WP Suspension PDS 5018 DCC
Compression damping, low-speed
Comfort 25 clicks
Standard 20 clicks
Sport 15 clicks
Compression damping, high-speed
Comfort 2 turns
Standard 1.5 turns
Sport 1.25 turns
Rebound damping
Comfort 28 clicks
Standard 24 clicks
Sport 22 clicks
Spring preload
Comfort 9 mm (0.35 in)
Standard 9 mm (0.35 in)
Sport 9 mm (0.35 in)
Spring rate
Weight of rider: 65… 75 kg (143… 165 lb.) 69 N/mm (394 lb/in)
Weight of rider: 75… 85 kg (165… 187 lb.) 72 N/mm (411 lb/in)
Weight of rider: 85… 95 kg (187… 209 lb.) 76 N/mm (434 lb/in)
Spring length 250 mm (9.84 in)
Gas pressure 10 bar (145 psi)
Static sag 33… 35 mm (1.3… 1.38 in)
Riding sag 105… 115 mm (4.13… 4.53 in)
Fitted length 417 mm (16.42 in)
Damper oil Shock absorber oil (SAE 2.5) (50180342S1) ( p. 110)
22.9 Chassis tightening torques
Spoke nipple, front wheel M4.5 5… 6 Nm (3.7… 4.4 lbf ft)
–
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
–
Screw, intake air temperature sensor M5 2 Nm (1.5 lbf ft)
–
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
–
Screw, spoiler on fuel tank M5x12 1.5 Nm (1.11 lbf ft)
–
Spoke nipple, rear wheel M5 5… 6 Nm (3.7… 4.4 lbf ft)
–
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
–
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Screw, ball joint of push rod on foot
brake cylinder M6 10 Nm (7.4 lbf ft) Loctite
®
243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft)
Loctite
®
243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, rear brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Fuel connection on fuel pump M8 10 Nm (7.4 lbf ft)
–
Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft)
–