KTM 50 SX 2020, Owner'S Manual

Page: 90 / 141

13 WHEELS, TIRES
88
H01198-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease the contact surfaces
A
of the spacers.
Long-life grease ( p. 132)
–
Insert the spacers.
H01452-11
–
Clean and grease the wheel spindle.
Long-life grease ( p. 132)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
H01451-10
–
Mount and tighten screw
1
.
Guideline
Screw, front
wheel spindle M10 40 Nm (29.5 lbf ft)
Loctite ® 243™
–
Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 41)
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
2
.
Guideline
Screw, fork stub M6 10 Nm (7.4 lbf ft)
13.3 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 41)
F02209-10
Main work
(50 SX)
–
Remove nut
1
.
–
Take off chain adjuster
2
.