KTM 450 XC, Owner'S Manual

Page: 69 / 208

MAINTENANCE ON CHASSIS AND ENGINE
67
Small weight differences can be compensated by adjusting the spring preload, but in the case of large weight differences, the springs
must be replaced.
Tip
When changing the chassis settings, always start with the standard setting.
Between test rides, always change only one setting. This will enable you to better assess the effect of the setting on vehicle han-
dling.
Do not make radical changes to the settings; proceed in small steps instead. Even small changes can have a large impact on vehi-
cle handling.
9.4
Front shock absorber - adjusting the compression damping
Danger
Danger of accidents The shock absorber is under high pressure.
–
The shock absorber is filled with highly compressed nitrogen, so never dismantle the shock absorber or carry out any mainte-
nance on it yourself.
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
–
Only make adjustments within the recommended range.
Info
The compression damping setting has an impact on the compression of the shock absorber.