KTM 450 XC, Owner'S Manual

Page: 129 / 208

MAINTENANCE ON CHASSIS AND ENGINE
127
–
Switch off all power-consuming components and switch off the engine.
–
Remove the rear fender. ( p. 140)
200150-10
–
Disconnect the negative (minus) cable

of the battery.
–
Pull back the plus pole cover and disconnect the positive (plus) cable

of the battery.
–
Loosen the rubber band

.
–
Remove the battery.
9.55
Installing the battery
200150-11
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Place the battery in the battery holder.
4Ah battery (YTX5L-BS) ( p. 189)
–
Reconnect the rubber band

.
–
Attach the plus cable and replace the plus pole cover

.
–
Connect the negative (minus) cable

of the battery.
–
Install the rear fender. ( p. 142)