3
WORK
24
3.24
Setting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Repeatedly press the button
briefly until
H
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
The Setup menu is displayed and the active functions are shown.
Info
If no button is pressed for 10
–
12 seconds, the settings are automatically
saved.
If no button is pressed for 20 seconds, or if an impulse comes from the
wheel speed sensor, the settings are automatically saved and the setup
menu is closed.
–
Repeatedly press the button
briefly until the desired function flashes.
The selected function flashes.
Activating the function
–
Press the button .
The symbol continues to appear in the display and the next function
appears.
Deactivating a function
–
Press the button .
The symbol disappears in the display and the next function appears.
3.25
Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Repeatedly press the button
briefly until
CLK
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
The hour display flashes.
–
Set the hour display with the button
and/or button .
–
Wait 3
–
5 seconds
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
and the button .
Info
The seconds can only be set to zero.
If no button is pressed for 15 -20 seconds, or if an impulse comes from
the wheel speed sensor, the settings are automatically saved and the setup
menu is closed.
