KTM 450 XC-W USA, Setup Instructions, Page: 10 / 31

3 WORK
8
3.1 Raising the motorcycle with the lift stand
401942-01
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
401943-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand

to the ground with your foot and lean
the motorcycle on it.
Info
While riding, the side stand must be folded up and secured with the rubber
band.
3.3 Removing headlight mask with headlight
K00117-10
(EXC EU, EXC Six Days EU, EXC AU)
–
Switch off all power consumers and switch off the engine.
–
Remove screw

and take off the clamp.
–
Release rubber straps

. Slide the headlight mask up and swing it forward.
K00118-10
–
Detach plug-in connectors

and take off the headlight mask with the head-
light.
V00035-10
(500 EXC US)
–
Switch off all power consumers and switch off the engine.
–
Remove screw

and take off the clamp.
–
Release rubber straps  . Slide the headlight mask up and swing it forward.