KTM 450 SX-F 2019, Owner'S Manual, Page: 68 / 163

11 SERVICE WORK ON THE CHASSIS
66
11.19 Installing front fender
F01526-10
Main work
–
Position front fender. Mount and tighten screws
1
and
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 65)
11.20 Removing the shock absorber
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 53)
F01527-10
Main work
–
Remove the cable ties.
–
Remove screws
1
with the washers.
–
Remove screw
2
.
–
Take off the left frame protector.
–
Push the right frame protector to the front and take off at the
bottom.
S01220-10
–
Remove screw
3
.
–
Remove fitting
4
.
Info
Raise the wheel slightly to be able to remove the screws
more easily.