17
SERVICE WORK ON THE ENGINE
94
V00319-10
(XC
‑
F US)
–
Clean plug-in connection
1
of the fuel line thoroughly with compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the
fuel line clogs the injection valve!
–
Disconnect the plug-in connection of the fuel line.
Info
Remaining fuel may flow out of the fuel hose.
–
Pull fuel screen
2
out of the connecting piece.
–
Insert the new fuel screen all the way into the connecting piece.
–
Lubricate the O-ring and connect plug-in connection of the fuel line.
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
–
Start the engine and check the response.
17.2
Checking the engine oil level
Info
The engine oil level can be checked when the engine is cold or warm.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
F00127-10
Condition
The engine is cold.
–
Check the engine oil level.
The engine oil reaches the middle of level viewer
A
.
» If the engine oil does not reach the middle of the level viewer:
–
Add engine oil. (
Condition
The engine is at operating temperature.
–
Check the engine oil level.
Info
After switching off the engine, wait one minute before checking the
level.
The engine oil level is between the middle of the level viewer
A
and the
upper edge of the level viewer
B
.
» If the engine oil does not reach the middle of level viewer
A
:
–
Add engine oil. (