KTM 450 SMR 2021, Owner'S Manual

Page: 96 / 139

14 ELECTRICAL SYSTEM
94
Finishing work
–
Install the 12 V battery. ( p. 92)
–
Mount the seat. ( p. 55)
14.4 Changing main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle. It is located in the starter relay hous-
ing under the seat.
Preparatory work
–
Remove the seat. ( p. 55)
F00136-10
Main work
–
Pull starter relay
1
from the holder.
F00135-10
–
Take off protection caps
2
.
–
Remove faulty main fuse
3
.
Info
A faulty fuse has a burned-out fuse wire
A
.
A spare fuse
4
is located in the starter relay.
–
Insert a new main fuse.
Fuse (58011109110) ( p. 122)
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
Finishing work
–
Mount the seat. ( p. 55)