KTM 390 DUKE 2017 Owner'S Manual Download Page 80

Page: 80 / 255

7 COMBINATION INSTRUMENT

7.17.18 Shift Light

F00834-01

Condition

• The motorcycle is stationary.
•

ODO

> 1000 km (621 mi).

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Preferences

is marked.

Press the

SET

button to open the menu.

–

Press the

DOWN

button until

Shift Light

is marked. Press

the

SET

button to open the menu.

–

Activate the menu item using the

DOWN

button.

–

Press the

SET

button to switch the shift warning light on or off

and to adjust the engine speed for the gear shift recommenda-
tion.

Info

When the engine speed reaches

RPM 1

, the speed dis-

play lights up red.
When the engine speed reaches

RPM 2

, the speed dis-

play flashes red.

7.17.19 Setting the time and date

Condition

The motorcycle is stationary.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands