KTM 390 Duke 2015 COL Page 26 Owner'S Manual Download

Page: 26 / 182

CONTROLS

6.5

Light switch

B00704-10

The light switch

is fitted on the left side of the handlebar.

Possible states

Low beam on

–

Light switch is turned downward. In this position, the low

beam and tail light are switched on.

High beam on

–

Light switch is turned upward. In this position, the high

beam and the tail light are switched on.

6.6

High beam flasher button

B00705-10

The high beam flasher button

is fitted on the left side of the handlebar.

Possible states

• High beam flasher button in neutral position
• High beam flasher button pressed

–

In this position, the headlight flasher (high beam)

is actuated.

Summary of Contents for 390 Duke 2015 COL























































































































































































Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands

KTM 390 Duke 2015 COL, Owner'S Manual

Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands