18
SERVICE WORK ON THE ENGINE
104
K00570-10
–
Mount and tighten screw plug
with the O-ring.
Guideline
Screw plug, oil screen
M20x1.5
15 Nm
(11.1 lbf ft)
–
Mount and tighten oil drain plug
with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet
M12x1.5
20 Nm
(14.8 lbf ft)
K00571-10
–
Remove screws
. Remove the oil filter cover with the O-ring.
K00572-10
–
Pull oil filter
out of the oil filter housing.
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
K00573-10
–
Lay the motorcycle on its right side and fill the oil filter housing approx.
⅓
full with
engine oil.
–
Place the oil filter into the oil filter housing.
–
Oil the O-ring of the oil filter cover and mount it with oil filter cover
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
M6
10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
401955-12
–
Remove filler plug
with the O-ring from the clutch cover and fill up with engine
oil.
Engine oil
1.0 l (1.1 qt.)
Engine oil (SAE 10W/50) (
Alternative engine
oil for harsh oper-
ating conditions
and increased per-
formance
Engine oil
(SAE 10W/60)
(00062010035)
Info
Too little engine oil or poor-quality engine oil results in premature wear of
the engine.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
Summary of Contents for 350 EXC-F 2017
Page 1: ...OWNER S MANUAL 2017 350 EXC F Art no 3213481en ...
Page 2: ......
