19
CARBURETOR
188
308534-10
Main work
–
Loosen hose clip
1
.
–
Loosen hose clip
2
.
–
Pull the carburetor out of the intake flange toward the rear.
308535-10
–
Pull the carburetor forward out of the intake flange.
308536-10
–
Remove screws
3
.
–
Remove the throttle slide cover and pull the throttle slide out of the carburetor.
–
Drain the remaining fuel.
308537-10
–
Pull back the throttle slide spring and plastic lock
4
.
–
Detach throttle cable
5
.
–
Remove the throttle slide.
19.5
Installing the carburetor
308538-10
Main work
–
Attach throttle cable
1
.
–
Position plastic retainer
2
.
The catch of the plastic retainer engages in the cut-out of the jet needle screw.
308539-10
–
Position the throttle slide and throttle slide cover.
–
Mount and tighten screws
3
.
Guideline
Screw, throttle slide cover
M5
3 Nm (2.2 lbf ft)
