6
FORK, TRIPLE CLAMP
12
6.1
EXC EU/AUS, XC
‑
W
6.1.1
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
B01510-10
–
Remove protection caps
1
.
–
Turn adjusting screws
2
clockwise all the way.
Info
Adjusting screws
2
are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
Comfort
22 clicks
Standard
20 clicks
Sport
18 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection caps
1
.
6.1.2
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
602708-10
–
Turn adjusting screws
1
clockwise all the way.
Info
Adjusting screws
1
are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
Comfort
20 clicks
Standard
18 clicks
Sport
16 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
6.1.3
Adjusting the spring preload of the fork
602708-11
–
Turn the adjusting screws counterclockwise all the way.
Info
Make the same adjustment on both fork legs.
–
Turn back clockwise by the number of turns corresponding to the fork type.
