17
LIGHTING SYSTEM, INSTRUMENTS
122
400329-01
–
Repeatedly press the button
briefly until
H
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button
briefly until
Km/h
/
Mph
flashes.
Setting the Km/h
–
Press the button .
Setting the Mph
–
Press the button .
–
Wait 3
–
5 seconds
The settings are stored.
Info
If no button is actuated for 10
–
12 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
17.4.4
Setting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Repeatedly press the button
briefly until
H
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
The Setup menu is displayed and the active functions are shown.
Info
If no button is pressed for 10
–
12 seconds, the settings are automatically
stored.
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the Setup
menu is closed.
–
Repeatedly press the button
briefly until the desired function flashes.
The selected function flashes.
Activating the function
–
Press the button .
The symbol continues to appear in the display and the next function
appears.
Deactivating a function
–
Press the button .
The symbol disappears in the display and the next function appears.
17.4.5
Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Repeatedly press the button
briefly until
CLK
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
The hour display flashes.
–
Set the hour display with the button
and/or button .
–
Wait 3
–
5 seconds
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
and the button .
