KTM 250 SX-F 2016, Owner'S Manual

Page: 44 / 118

11 SERVICE WORK ON THE CHASSIS
42
102150-11
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft)
102149-11
–
Position the brake caliper. Mount and tighten screws

.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Position the brake line and clamp. Mount and tighten screws

.
Finishing work
–
Install the front wheel. ( p. 73)
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 39)
–
Remove the front wheel. ( p. 73)
–
Remove the fork legs. ( p. 41)
–
Remove the start number plate. ( p. 46)
–
Remove the front fender. ( p. 46)
–
Remove the handlebar cushion.
102152-10
Main work
–
Remove the holder with FI warning lamp.
–
Remove screw  .
–
Remove screw

.
–
Remove the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
102153-10
–
Remove O-ring

. Remove protective ring

.
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.