KTM 250 EXC-F EU 2010, Owner'S Manual

Page: 97 / 136

15 ELECTRICAL SYSTEM
95
15.5 Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. ( p. 62)
K00095-10
Main work
–
Open fuse box cover  .
K00094-10
–
Remove the defective fuse.
Guideline
Fuse
1
- 10 A - EFI control unit
Fuse 2 - 5 A - fuel pump
Fuse 3 - 10 A - high beam, low beam, parking light, tail light, license plate lamp
Fuse 4 - 10 A - horn, brake light, turn signal, radiator fan (optional)
Fuses res - 10 A - spare fuse
Fuses res - 5 A - spare fuse
Info
A defective fuse can be identified by the burned-out fuse wire  .
Warning
Fire hazard
The electrical system can be overloaded if the wrong fuses are
used.
–
Use only fuses with the prescribed amperage. Never bypass or repair
fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) ( p. 120)
Fuse (58011109105) ( p. 120)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
Finishing work
–
Mount the seat. ( p. 62)
15.6 Removing headlight mask with headlight
K00118-10
(All EXC
‑
F models)
–
Detach plug-in connectors  and take off the headlight mask with the head-
light.