3 WORK
26
3.11
Removing the seat
V00342-10
–
Remove screws
1
.
–
Raise the rear of the seat, pull the seat back, and lift it off.
3.12
Mounting the seat
V00343-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
V00342-10
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
3.13
Removing the battery
Warning
Environmental hazard
Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Dispose of batteries at a collection point for used batteries.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Preparatory work
(EXC
‑
F EU/AU/BR, EXC
‑
F Six Days)
–
Press and hold the kill switch
while the engine is idling
until the engine stops.
