KTM 250 DUKE, Owner'S Manual, Page: 50 / 186

6 CONTROLS
48
401303-01
–
Press the MODE button briefly and repeatedly until ODO appears on the display.
–
Press the MODE and SET buttons for 5 - 10 seconds.
The time display begins to flash.
–
Set the hours display using the MODE button.
–
Set the minutes display using the
SET
button.
–
Press the
MODE
and
SET
buttons for 5 - 10 seconds.
The time is set.
6.13.22 Adjusting the shift speed RPM 1
Condition
The ignition is on.
The motorcycle is stationary.
401307-01
–
Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
–
Press the MODE button for 5 - 10 seconds.
The display
RPM 1
appears.
Info
The engine speed can be set at intervals of 50.
RPM 1
is the engine speed above which the shift warning light starts flashing.
–
Set the speed with the MODE and SET buttons.
Info
The MODE button increases the value.
The SET button decreases the value.
–
Do not activate the two buttons for approx. 15 seconds.